How To Make Vinyl Exit Door
Almost two years ago I decided to paint my door black and paint an exit sign on it. So I decided that a vinyl exit sign was a much better option.
While I loved the door black, I didn’t really get the right black. And while I loved the thought of the exit sign, the actual execution left a little to be desired. While I was working on another project, I found the perfect black color and used the leftover paint to repaint my back door.
Yes, I’m even picky about black paint. {And if you are, too, then Valspar Pantone Jet Black will rock. your. world.}
Back to the black… So picky me painted the door. I wanted to re-do the exit sign, but wanted something bigger, bolder, and boxier. I wanted something reminiscent of a true exit sign. So what do you do when you want something new? Make it, of course.
For this project you will need
- Surface to hold vinyl (I used my door)
- sheet of white vinyl
- painter’s tape
- craft knife
- Silhouette Machine
- Time needed: Less than 10 minutes
After my door was all painted and dry, I pulled out a white vinyl sheet. So why this route instead of a roll. Well if you’re like me, you really don’t want to order more than you need, because who wants to pay for stuff to sit in a box and take up space? Not me.
Their 12×24 sheet perfectly fits my large Silhouette mat, and it’s silly stuff like that makes me happy. No guessing and whacking off of a roll, just slap it on and go.
Then I measured the spot on my door where I wanted the sign, set up the text in my Silhouette software (I used Arial Black font) and in about 30 seconds the vinyl was cut.
I used a craft knife to score the vinyl so I could save the other half of the sheet that I didn’t use (because I’m thrifty, yo!) and peeled off the negative vinyl revealing the letters.
I’ve shared this tip before, but it’s worth repeating. Because I was out of vinyl transfer, I used a few rows of painters tape to grab the vinyl letters.
Then I put it on the door exactly where I wanted, rubbing down the letters really well to adhere them to the door before carefully pulling off the painter’s tape. In about five minutes from start to finish, I was done.
Now I get that chunky, bold font that I want, but if I want to take it off I can just peel off the vinyl.
